Measure the door and, if necessary, cut the piece with a saw. Clean the surface of the door with alcohol and dry with a clean cloth.

1. Position the piece by laying the brush or PVC blade on the floor and mark a guide line.

1.2 – Subtract the “indentation” from the jam (frame) where the door is installed.

2. Fixing with screws

2.1 – Use the product holes to mark where to drill on the door.

2.2 – After drilling the door, use the screws that are in the packaging to fix the product.

3. Fixing with double-sided adhesive tape

3.1 – Remove approximately 10 cm from the protective paper on one side. Avoid any contact with the adhesive.

3.2 – Once the 10 cm of the adhesive is pasted, align the piece following the guide line and press it down all the way. Contact with water or cleaning products should be avoided during the 72 hours following application of the product.