With a modern and sophisticated aesthetic, the linear drain stands out for its high drainage capacity and ease of cleaning.
However, it is important to note that improper installation of this drain can lead to significant clogs. While homemade solutions can be helpful for simpler clogging issues, in more severe cases, it is advisable to seek assistance from a qualified professional.
Some Homemade Methods to Unclog the Drain
Remember to take proper safety measures when handling chemicals or performing unclogging tasks, such as wearing gloves and protective goggles.
Hot Water
Pour hot water down the drain to help remove and clean accumulated debris.
Salt
To unclog the drain using salt, you will need the following items:
- Three tablespoons of salt;
- Three tablespoons of any type of vinegar;
- One liter of boiling water;
- Cleaning gloves;
- A damp cloth.
Pour three tablespoons of salt into the clogged drain, then carefully add the vinegar directly into the drain and pour the boiling water carefully. Cover the drain with a folded damp cloth and wait 15 minutes. Then, pour boiling water into the drain again and check if the flow is normal. If not, repeat the entire process.
Baking Soda and Vinegar
To unclog the drain with baking soda and vinegar, you will need:
- A 50g package of baking soda;
- Half a cup of vinegar;
- Hot water.
Pour the baking soda into the clogged drain and add half a cup of vinegar. Let the mixture sit for 15 to 30 minutes, then carefully pour hot water directly into the drain. This chemical reaction can help break down accumulated debris. After this procedure, run water to verify if the drain is unclogged. If necessary, repeat the process.
Powder Detergent
Powder detergent is a great degreaser, working in the drain to eliminate and dissolve plaques formed by products that eventually accumulate and flow through the drain.
To unclog the drain using powder detergent, you will need:
- Half a cup of powder detergent;
- Hot water;
- Vinegar.
Start by pouring the powder detergent into the clogged drain, ensuring the product is fully concentrated inside the drain. Then, add half a cup of vinegar. Carefully pour one liter of hot water over the combination. Wait at least 15 minutes and test if the drain flow has returned to normal. If not, repeat all the previous steps for better results.
Keep the Linear Drain Always Clean
Regular cleaning and maintenance are essential to prevent clogs and unpleasant odors caused by debris buildup in the drain.
How to Clean the Linear Drain
To perform proper cleaning, follow these steps:
- Remove the lid or top channel and take out the inner retainer grid. Clean everything and discard debris in the trash, avoiding flushing it down the toilet;
- Don’t forget to remove and clean the Drain Seal.
When cleaning, use neutral and non-abrasive products, as abrasive substances can cause unwanted stains. Be sure to follow the instructions of the chosen product.
These measures will ensure effective maintenance and prolong the system’s lifespan, keeping it clean and working properly.
How Often Should the Drain Be Cleaned?
The recommended frequency for cleaning the drain may vary depending on the use and specific characteristics of each environment. Generally, it is advisable to clean the drain at least once a month to prevent debris buildup.
In high-traffic areas or those prone to dirt, more frequent cleaning may be necessary, even weekly.
The presence of standing water is also a clear sign that it is time to clean the drain.
